{config.cms_name}
adjuvant · spray enhancer

Agricultural Silicone Spray Adjuvant

Professional non-ionic organosilicone adjuvant – dramatically reduces surface tension, enhances wetting, spreading, and penetration. Compatible with herbicides, insecticides, fungicides, and foliar fertilizers. Suitable for ground, aerial, and drone applications.

0.03%
recommended rate
22 mN/m
surface tension (0.1%)
<15°
contact angle (paraffin)
pH 5-8
stable range
overview

Premium Silicone Adjuvant for Modern Agriculture

Agricultural Silicone Spray Adjuvant is a high-performance non-ionic organosilicone surfactant engineered to optimize the efficacy of crop protection products and foliar nutrients. Unlike conventional surfactants, this adjuvant features a unique trisiloxane backbone that delivers exceptional surface activity, enabling spray solutions to spread rapidly across waxy leaf surfaces, penetrate stomata, and resist wash-off. The result is better coverage, faster uptake, and more consistent field performance — even under challenging environmental conditions.

Formulated with >98% active silicone polyether, the adjuvant reduces the dynamic surface tension of water-based sprays to approximately 22 mN/m at 0.1% concentration. This ultra-low tension allows droplets to spread and cover 2–3 times more leaf area compared to standard non-ionic surfactants. The spreading action is particularly valuable for weeds with hairy or hydrophobic leaves, such as waterhemp, goosegrass, and broadleaf weeds, where conventional sprays tend to bead and roll off.

Beyond spreading, the adjuvant enhances cuticular penetration by temporarily disrupting the epicuticular wax layer, facilitating rapid absorption of active ingredients. This property is critical for systemic herbicides (glyphosate, glufosinate, 2,4-D) and fungicides (strobilurins, triazoles) where foliar uptake directly influences efficacy. Field trials consistently show that adding this silicone adjuvant at 0.05–0.1% v/v can improve weed control by 15–30% while allowing reduced herbicide rates — supporting sustainable farming and lowering input costs.

The adjuvant also exhibits excellent rainfastness. Once the spray deposit dries (typically within 30–60 minutes), it forms a hydrophobic film that resists wash-off by light to moderate rainfall. This feature provides growers with a wider application window and reduces the risk of re-treatment. Additionally, the product is low-foaming, making it compatible with high-speed sprayers, aerial application, and unmanned aerial vehicles (UAVs) where foam suppression is essential for pump performance and tank stability.

Environmentally, the adjuvant is biodegradable and exhibits low acute toxicity to aquatic organisms (LC₅₀ > 200 mg/L for fish). It is compatible with most agrochemical formulations, including suspension concentrates (SC), emulsifiable concentrates (EC), water-dispersible granules (WG), and soluble liquids (SL). The adjuvant also improves tank-mix compatibility when combining multiple products, reducing the risk of precipitation or phase separation. With a shelf life of 24 months and stable performance across a wide temperature range, it is a reliable partner for modern crop protection programs.

Key takeaway: Agricultural Silicone Spray Adjuvant is not just a surfactant — it is a performance enhancer that unlocks the full potential of your spray applications, delivering better biological efficacy, reduced drift, and greater operational flexibility.
core benefits

Why Choose Silicone Adjuvant

Ultra-spreading
Surface tension down to 22 mN/m; covers 2–3× more leaf area.
Rainfastness
Dries to a hydrophobic film; resists wash-off after 1 hour.
Penetration enhancer
Disrupts wax layers for faster uptake of systemic actives.
Low foam / drone ready
Excellent for high-speed & UAV sprayers; minimises pump cavitation.
Broad compatibility
Stable with SC, EC, WG, SL; reduces tank-mix incompatibility.
Eco-conscious
Biodegradable, low toxicity, supports reduced herbicide rates.
how it works

Mechanism of action

Agricultural Silicone Spray Adjuvant leverages the unique properties of trisiloxane surfactants. When added to a spray solution, it rapidly reduces the dynamic surface tension to approximately 22 mN/m – far lower than conventional surfactants.

This ultra-low tension allows droplets to spread and wet leaf surfaces almost instantaneously, covering 2–3× more area. The adjuvant then disrupts the epicuticular wax layer on the plant surface, enabling active ingredients to penetrate stomata and cuticle more efficiently.

Once the spray deposit dries, the adjuvant forms a hydrophobic film that provides rainfastness, reducing wash-off by light to moderate rainfall.

Surface tension reduction vs. concentration
0.01%
0.03%
0.05%
0.10%
0.20%
35 mN/m28 mN/m24 mN/m22 mN/m21 mN/m

Dynamic surface tension decreases sharply with concentration, plateauing near 0.1%.

specifications

Product specifications

Parameter Value
Appearance Clear to slightly hazy liquid
Active content ≥ 98% (silicone polyether)
Viscosity (25°C) 40 – 80 cSt
Density (25°C) 1.01 – 1.05 g/cm³
Cloud point (1% aq.) > 40°C
Flash point > 100°C
pH (1% aq.) 5.5 – 7.5
Storage stability 24 months (cool, dry)
technical performance

Performance data

Surface tension
22 mN/m (0.1% aq.)
Contact angle
≤ 15° (on paraffin)
Spreading area
> 200 mm²/10 µL
Foam height (after 1 min)
< 20 mL (0.1%)
Hard water tolerance
Stable up to 1000 ppm CaCO₃
Drying time
30–60 min (rainfast)
Recommended use rate: 0.03% – 0.1% v/v (30–100 ml per 100 L water). For drone applications: 0.05% – 0.08% v/v.
About Guituo
play
About Guituo
As China agricultural silicone spray adjuvant Manufacturers and Wholesale agricultural silicone spray adjuvant Factory, Ningbo Guituo Trading Co., Ltd. is a subsidiary of Hebei Guituo New Materials Co., Ltd. — a high-tech enterprise integrating R&D, production, and sales. The company has always taken technology as the core driving force, focusing on the in-depth development and innovative application of high-end silicone materials in industrial and agricultural fields. It is a professional new materials enterprise with considerable influence in the industry. To ensure product quality and stable supply, the company has established a comprehensive guarantee system: it is equipped with internationally advanced production equipment and precise testing facilities, and has built a full-process quality monitoring mechanism from the production source to the delivery of finished products. It has assembled an experienced technical and production team with strong professional skills. With profound industry accumulation and precise technical control, it ensures that every product meets high standards...
  • 2021

    Company Establishment

  • 10000

    Advanced Factory

  • 50+

    Exporting Country

VIEW MORE

Our Certifications
And Partners

Professional scale factory production. We can customize finished products wholesale and export, OEM production, and distribution.

I just wanted to let you know that welcome to inquire and place orders.

Hebei Guituo New Material Co., Ltd. Hebei Guituo New Material Co., Ltd. Hebei Guituo New Material Co., Ltd. Hebei Guituo New Material Co., Ltd.
comparison

Adjuvant performance benchmark

Property Silicone adjuvant Conventional NIS Vegetable oil
Surface tension (0.1%) 22 mN/m 32–36 mN/m 28–32 mN/m
Spreading area (relative) 2.5× 1.0× 1.3×
Penetration enhancement High Moderate Moderate
Rainfastness (1 hour) Excellent Poor Fair
Foam tendency Low High Low
Drone compatibility Yes Limited Yes
Key advantage: Silicone adjuvant delivers superior spreading and rainfastness while maintaining low foam – ideal for modern high-speed and UAV sprayers.
field trial data

Proven performance in the field

Weed control efficacy (glyphosate + adjuvant)
72%
Glyphosate only
88%
+ 0.05% adj.
95%
+ 0.10% adj.
Fungicide uptake (azoxystrobin) – 24h
42%
Without adj.
78%
+ 0.05% adj.
91%
+ 0.10% adj.

Source: independent field trials, 2024–2025. Data represent average of 12 locations.

compatibility

Tank-mix compatibility

Glyphosate
Glufosinate
2,4-D
Atrazine
Pyrethroids
Strobilurins
Triazoles
Copper-based
Foliar NPK
Micronutrients

Fully compatible   Test before full mix

calculator

Dilution calculator

Enter your spray tank volume to get the recommended adjuvant dose (0.05% v/v for general use).

50 mL

Adjust rate according to crop and application type. For drone use, 0.05–0.08% is typical.

application methods

How to apply

Ground spraying
Boom sprayers, mist blowers. Use 0.03–0.08% v/v. Fine to medium droplets.
Aerial / Drone
UAV-compatible, low foam. 0.05–0.08% v/v. Reduces drift, improves deposition.
Foliar feed
Mix with liquid fertilisers. Enhances nutrient spread and leaf uptake.
Seed treatment
Can be used as a wetting agent for seed coatings (test compatibility first).
Pro tip: Always add the adjuvant as the last component into the spray tank, after pesticides and fertilisers have been thoroughly mixed.
safety & handling

Safe use guidelines

  • Personal protection — Wear gloves, goggles, and long sleeves during mixing.
  • First aid — In case of contact, rinse skin/eyes with plenty of water. If ingested, seek medical advice.
  • Storage — Keep in original container, tightly closed, in a cool, dry place (5–40°C).
  • Environmental — Biodegradable (OECD 301). Low toxicity to fish (LC₅₀ > 200 mg/L).
  • Disposal — Dispose of empty containers according to local regulations. Do not contaminate water sources.
  • Shelf life — 24 months in unopened container. Avoid extreme temperatures.
applications

Crops & use cases

  • Row crops — corn, soybean, wheat, rice; boosts herbicide & fungicide performance.
  • Fruit & vegetables — citrus, grapes, tomato, leafy greens; improves disease control.
  • Oilseed & fibre — cotton, rapeseed, sunflower; reduces spray wastage.
  • Specialty — orchards, vineyards, plantation crops; excellent for trunk sprays.

Also suitable for turf, ornamentals, and forestry applications.

advantages

Why it outperforms

  • Reduced pesticide use — improves efficacy, allows 20–30% rate reduction.
  • Faster absorption — systemic actives enter plant tissue within hours.
  • Drift reduction — larger droplets due to improved rheology.
  • Cost-effective — low use rate delivers high return on investment.
usage tips

Application guidelines

  • Tank mixing order: add pesticides/fertilisers first, then adjuvant as last addition.
  • Pre-dilution: pre-mix with a small amount of water before adding to the spray tank.
  • Spray quality: fine to medium droplets (100–250 µm) for best coverage.
  • Environmental conditions: apply when wind < 15 km/h, avoid extreme heat.
storage & packaging

Packaging & shelf life

  • Packaging: 1 L, 5 L, 20 L, 200 L drums / IBC totes.
  • Storage: cool, dry, away from direct sunlight; 5–40°C.
  • Shelf life: 24 months in unopened original container.
quality assurance

Global quality benchmarks

Test item Standard requirement Our performance
Surface tension (0.1%) ≤ 25 mN/m 22 mN/m
Spreading area > 100 mm²/10µL > 200 mm²
Hard water stability 500 ppm CaCO₃ Stable up to 1000 ppm
Aquatic toxicity (fish) LC₅₀ > 100 mg/L LC₅₀ > 200 mg/L
Biodegradability OECD 301 Readily biodegradable
FAQs

Frequently asked questions

Q1. What is the recommended use rate?
0.03% – 0.1% v/v (30–100 mL per 100 L water). For drone applications, 0.05–0.08%.
Q2. Can it be used with all pesticides?
It is compatible with most herbicides, fungicides, and insecticides. Always perform a jar test for unfamiliar mixes.
Q3. Is it drone-compatible?
Yes, low-foam and excellent wetting make it ideal for UAV sprayers.
Q4. How soon is it rainfast?
After drying (30–60 minutes), it resists wash-off from light to moderate rain.
Q5. Does it reduce herbicide rates?
Yes, many users achieve equivalent control with 20–30% less herbicide.
Q6. What is the shelf life?
24 months in original container, stored between 5–40°C.
Q7. Is it safe for sensitive crops?
At recommended rates, it is safe. Test on a small area first for sensitive varieties.
Q8. Does it foam in the tank?
No, it is low-foaming and suitable for high-speed agitation.
Q9. Can I mix it with fertilisers?
Yes, it is compatible with most foliar fertilisers and micronutrients.
Q10. How does it compare to NIS?
Silicone adjuvant has much lower surface tension (22 vs ~32 mN/m) and superior spreading.
Q11. Is it biodegradable?
Yes, it is readily biodegradable (OECD 301).
Q12. Can I get a sample?
Yes, free samples are available for commercial evaluation.
Q13. What is the packaging for bulk orders?
We offer 1 L, 5 L, 20 L, 200 L drums and IBC totes. Custom packaging available.
related insights

Latest articles & guides

Organosilicone Surfactant for Pesticide Spray

overview Purpose-Built Adjuvant for Insecticide and Pesticide Spray Efficacy Or

Organosilicone Wetting and Spreading Agent

overview Balanced Dual-Function Performance for Powder Dissolving and Leaf Sprea

Silicone Surfactant for Agricultural Chemicals

overview Multi-Functional Silicone Surfactant for Agrochemical Formulation Sili

Water Soluble Agricultural Silicone Oil

overview A Fully Water-Miscible Silicone Fluid for Nutrient and Fertigation Syst

High Performance Silicone Agricultural Adjuvant

overview The Flagship Adjuvant for High-Value Crop Programs High Performance Si

Modified Silicone Fluid for Agriculture

overview Functional Silicone Fluid for Agricultural Films, Coatings, and Textile

Agricultural Chemical Silicone Defoaming Agent

overview Industrial-Scale Antifoam for Agrochemical Manufacturing Processes Agr

Silicone Spreader for Foliar Fertilizer

overview Purpose-Built Spreader for Foliar Nutrition Programs Silicone Spreader

Super Spreading Silicone Agricultural Surfactant

overview Super-Spreading Performance for Turf, Ornamentals, and Nursery Producti

Boost your spray efficacy — start with the right adjuvant

Free samples · Technical support · Customised formulations

cnguituonewmaterial.com · Agricultural adjuvants & new materials