{config.cms_name}
water-soluble silicone fluid · fertigation additive

Water Soluble Agricultural Silicone Oil

Fully water-miscible, heavily EO-modified silicone fluid — dissolves clear with no oil phase, ideal for fertigation, hydroponics, and foliar nutrient systems where clogging residues are unacceptable.

Fully miscible
water solubility
27 mN/m
surface tension (0.1%)
>60°C
cloud point
0.01–0.03%
recommended rate
overview

A Fully Water-Miscible Silicone Fluid for Nutrient and Fertigation Systems

Water Soluble Agricultural Silicone Oil is a heavily polyether-modified silicone fluid engineered to dissolve completely and clearly into water rather than merely dispersing as fine emulsion droplets, distinguishing it from both unmodified dimethyl silicone oil (which is essentially insoluble) and moderately modified polyether-silicone surfactants (which typically form emulsions or micelles rather than a true solution). At use concentrations, the product forms a visually clear, single-phase solution with no oil layer, cloudiness, or separation — a property that matters directly in fertigation and hydroponic nutrient systems where any undissolved oil phase can foul drip emitters, filters, and injector equipment.

This complete water solubility is achieved through a high ratio of ethylene oxide side-chain modification along the siloxane backbone, which raises the molecule's hydrophilic character enough to overcome the siloxane backbone's inherent water-insolubility. The resulting fluid has a cloud point above 60°C, meaning it remains fully dissolved even in warm greenhouse fertigation water, where lower-EO-content silicone products can begin to phase-separate as temperature rises.

In practical use, the fluid is added to liquid fertilizer concentrates, foliar micronutrient sprays, and hydroponic nutrient solutions at 0.01–0.03% v/v, where its surface activity (surface tension reduced to approximately 27 mN/m) improves foliar spray coverage and helps liquid nutrients penetrate soil or growing-media surfaces more evenly, without leaving the oily residue film associated with some other silicone-based additives — an important consideration for greenhouse and hydroponic operations where residue on equipment surfaces and root zones is closely managed.

Because the product remains in true solution rather than an emulsion, it also resists separating out during long-term storage of pre-mixed nutrient stock solutions, a practical advantage for growers who prepare concentrate batches in advance rather than mixing fresh before every fertigation cycle.

The fluid is compatible with the calcium, magnesium, and micronutrient chelate salts common in fertilizer formulations, and testing shows no precipitation or salting-out when combined with standard N-P-K liquid fertilizer concentrates across typical greenhouse water hardness ranges.

Key takeaway: Water Soluble Agricultural Silicone Oil is built around one defining property — true water solubility rather than emulsification — making it the silicone additive of choice for fertigation, hydroponic, and foliar nutrient systems where filter- and emitter-clogging oil phases are not an option.
core benefits

Why True Water Solubility Matters

No oil phase
Dissolves clear — no droplets to clog drip emitters or filters.
High cloud point
Stays fully dissolved above 60°C, even in warm greenhouse water.
No oily residue
Leaves equipment and root zones free of silicone film buildup.
Storage-stable concentrates
Resists separation in pre-mixed nutrient stock solutions.
Chelate compatible
No precipitation with calcium, magnesium, or micronutrient chelates.
Fertigation-ready
Purpose-built for drip, hydroponic, and foliar nutrient delivery.
how it works

Mechanism of action

Water Soluble Agricultural Silicone Oil achieves true solubility through a high density of ethylene oxide (EO) side chains grafted along its siloxane backbone — enough hydrophilic character to overcome the backbone's natural water-repellency and allow the molecule to dissolve as individual solvated units rather than forming emulsion droplets.

Because there is no oil-water interface to stabilize, the fluid behaves like a true solute: it does not require agitation to stay mixed, does not separate on standing, and passes cleanly through fine filters and drip emitters that would otherwise trap emulsion droplets or free oil.

The same EO-rich structure still provides meaningful surface activity, lowering surface tension to around 27 mN/m — enough to improve foliar spray coverage and soil-surface wetting during fertigation, without the oily film that lower-solubility silicone products can leave behind.

Solution clarity vs. temperature
20°C
30°C
40°C
50°C
60°C
clearclearclearclearclear (cloud pt. >60°C)

The fluid remains a clear, single-phase solution across the full range of typical greenhouse fertigation temperatures.

specifications

Product specifications

ParameterValue
AppearanceClear, colorless liquid
Active content≥ 95% (heavily EO-modified silicone)
Viscosity (25°C)60 – 100 cSt
Density (25°C)1.03 – 1.08 g/cm³
Water solubilityFully miscible, all proportions
Cloud point (1% aq.)> 60°C
pH (1% aq.)6.0 – 7.5
Storage stability24 months (cool, dry)
technical performance

Performance data

Surface tension
27 mN/m (0.1% aq.)
Filter/emitter clogging risk
None — true solution, no oil phase
Chelate compatibility
No precipitation with Ca/Mg/micronutrients
Residue on equipment
Minimal to none
Storage stability (concentrate)
No separation after 6 months
Hard water tolerance
Stable up to 600 ppm CaCO₃
Recommended use rate: 0.01% – 0.03% v/v in fertigation or foliar nutrient solutions (10–30 mL per 100 L water).
About Guituo
play
About Guituo
As China Water Soluble Agricultural Silicone Oil Manufacturers and Wholesale Water Soluble Agricultural Silicone Oil Factory, Ningbo Guituo Trading Co., Ltd. is a subsidiary of Hebei Guituo New Materials Co., Ltd. — a high-tech enterprise integrating R&D, production, and sales. The company has always taken technology as the core driving force, focusing on the in-depth development and innovative application of high-end silicone materials in industrial and agricultural fields. It is a professional new materials enterprise with considerable influence in the industry. To ensure product quality and stable supply, the company has established a comprehensive guarantee system: it is equipped with internationally advanced production equipment and precise testing facilities, and has built a full-process quality monitoring mechanism from the production source to the delivery of finished products. It has assembled an experienced technical and production team with strong professional skills. With profound industry accumulation and precise technical control, it ensures that every product meets high standards...
  • 2021

    Company Establishment

  • 10000

    Advanced Factory

  • 50+

    Exporting Country

VIEW MORE

Our Certifications
And Partners

Professional scale factory production. We can customize finished products wholesale and export, OEM production, and distribution.

I just wanted to let you know that welcome to inquire and place orders.

Hebei Guituo New Material Co., Ltd. Hebei Guituo New Material Co., Ltd. Hebei Guituo New Material Co., Ltd. Hebei Guituo New Material Co., Ltd.
comparison

Performance benchmark

PropertyThis water-soluble oilPolyether-modified siliconeUnmodified silicone oil
Water solubilityFully miscibleEmulsified (fine droplets)Insoluble
Filter/emitter clogging riskNoneLow but presentHigh
Cloud point (1% aq.)> 60°C35–45°CNot applicable
Residue on equipmentMinimalModerateHigh (oil film)
Fertigation suitabilityPurpose-builtUsable with cautionNot recommended
Key advantage: True water solubility eliminates the oil-phase clogging risk that limits other silicone products in fine-filtration fertigation and hydroponic delivery systems.
field trial data

Fertigation system performance results

Drip emitter clogging incidents over 30-day trial (count)
5 incidents
Emulsified silicone additive
9 incidents
Unmodified silicone oil
0 incidents
This water-soluble oil
Foliar micronutrient spray coverage improvement (%)
baseline
No additive
+31%
+ 0.01% water-soluble oil
+44%
+ 0.03% water-soluble oil

Source: greenhouse fertigation and foliar nutrient trials, 2024–2025.

compatibility

Tank-mix compatibility

Calcium nitrate solutions
Magnesium sulfate solutions
Micronutrient chelates (EDTA)
N-P-K liquid concentrates
Hydroponic nutrient solutions
Foliar micronutrient sprays
Drip irrigation systems
Fine mesh filters (<100 mesh)
Copper-based actives
Hard water (600 ppm)

Fully compatible   Test before full mix

calculator

Dilution calculator

Enter your fertigation tank volume to estimate the recommended dose (0.02% v/v typical).

0.02 L
application methods

How to apply

Drip fertigation
0.01–0.03% v/v injected into the nutrient line; no risk of emitter clogging.
Hydroponic systems
Add directly to nutrient reservoir; remains in true solution.
Foliar micronutrient spray
0.01–0.03% v/v for improved leaf coverage without oily residue.
Pre-mixed concentrate storage
Stable in stock solutions for extended periods before use.
Pro tip: Because the product is a true solution rather than an emulsion, it can be injected directly into fine-filtration fertigation lines without the pre-filtering precautions some silicone additives require.
safety & handling

Safe use guidelines

  • Personal protection — Wear gloves and eye protection during handling.
  • First aid — Rinse skin/eyes with water; if ingested, seek medical advice.
  • Storage — Keep sealed, cool, and dry, away from direct sunlight.
  • Environmental — Biodegradable; low aquatic toxicity.
  • Disposal — Dispose of containers per local regulations; do not contaminate water sources.
  • Shelf life — 24 months in unopened original container.
applications

Crops & use cases

  • Greenhouse fertigation — drip and micro-irrigation nutrient delivery systems.
  • Hydroponic & soilless growing — nutrient solution additive for even root-zone delivery.
  • Foliar nutrition programs — leafy greens, orchards, and vegetable crops using foliar micronutrients.
  • Nursery liquid feeding — container production using automated fertigation systems.

Also suitable for use in fine-mesh filtered irrigation systems where any oil-phase additive risks clogging.

advantages

Why it outperforms

  • Zero clogging risk — true solution passes through fine filters and emitters without residue.
  • Improves nutrient coverage — up to 44% foliar spray coverage improvement at 0.03%.
  • No oily film — leaves equipment and root zones free of silicone residue.
  • Stable in stock solutions — supports advance-prepared concentrate batches.
usage tips

Application guidelines

  • Injection point: add via standard fertigation injector; no special pre-dilution needed
  • Concentrate storage: stable for extended storage, but confirm compatibility with your specific nutrient blend
  • Foliar spray timing: apply during active growth for best nutrient uptake improvement
  • Filter maintenance: standard filter maintenance schedules apply — no special precautions needed
storage & packaging

Packaging & shelf life

  • Packaging: 1 L, 5 L, 20 L, 200 L drums / IBC totes.
  • Storage: cool, dry, away from direct sunlight; 5–40°C.
  • Shelf life: 24 months in unopened original container.
quality assurance

Global quality benchmarks

Test itemStandard requirementOur performance
Water solubilityEmulsified acceptableFully miscible
Cloud point (1% aq.)> 40°C> 60°C
Surface tension (0.1%)≤ 30 mN/m27 mN/m
Chelate compatibilityNot routinely testedConfirmed, no precipitation
BiodegradabilityOECD 301Readily biodegradable
FAQs

Frequently asked questions

Q1. How is this different from a regular silicone oil?
It is fully water-soluble and dissolves clear, with no oil phase that could clog equipment.
Q2. Will it clog my drip emitters?
No, because it forms a true solution rather than an emulsion.
Q3. What is the recommended use rate?
0.01% – 0.03% v/v (10–30 mL per 100 L water).
Q4. Is it suitable for hydroponic systems?
Yes, it is purpose-built for hydroponic and fertigation nutrient delivery.
Q5. Does it leave residue on equipment?
Minimal to none, unlike emulsified or oil-based silicone additives.
Q6. Is it compatible with chelated micronutrients?
Yes, no precipitation observed with common chelate formulations.
Q7. Can I pre-mix it into concentrate stock solutions?
Yes, it remains stable in solution for extended storage.
Q8. Does warm greenhouse water cause separation?
No, its cloud point is above 60°C, well above typical fertigation temperatures.
Q9. Is it compatible with copper-based actives?
Generally yes; a jar test is recommended for unfamiliar combinations.
Q10. What is the shelf life?
24 months in the original sealed container.
Q11. Is it biodegradable?
Yes, it is biodegradable under standard test protocols.
Q12. What packaging is available?
1 L, 5 L, 20 L, 200 L drums and IBC totes.
Q13. Can I request a free sample?
Yes, samples are available for fertigation system trial.
related insights

Latest articles & guides

Silicone-Based Agricultural Tank Mix

overview A Ready-Blended, One-Bottle Tank-Mix Solution Silicone-Based Agricultu

Silicone Surfactant for Agricultural Chemicals

overview Multi-Functional Silicone Surfactant for Agrochemical Formulation Sili

Agricultural Silicone Super Spreading Agent

overview Extreme Leaf-Surface Coverage Through True Super-Spreading Agricultura

Agricultural Chemical Silicone Defoaming Agent

overview Industrial-Scale Antifoam for Agrochemical Manufacturing Processes Agr

Agricultural Grade Silicone Wetting Agent

overview Certified, Traceable Wetting Agent Built for Registration-Grade Consist

High Performance Silicone Agricultural Adjuvant

overview The Flagship Adjuvant for High-Value Crop Programs High Performance Si

Silicone Spreader for Foliar Fertilizer

overview Purpose-Built Spreader for Foliar Nutrition Programs Silicone Spreader

Agricultural Spray Adjuvant Wetting Agent

overview The General-Purpose Workhorse Adjuvant for Everyday Spray Programs Agr

Silicone Surfactant for Herbicide Application

overview Purpose-Built for Broadleaf and Grass Weed Herbicide Programs Silicone

A silicone additive your emitters will never see

Free samples · Fertigation system compatibility support

cnguituonewmaterial.com · Agricultural adjuvants & new materials